Sony PlayStation 3

• Emulator: rpcs3
• Folder: /userdata/roms/ps3
• Accepted ROM formats: .ps3 .psn .squashfs

The latest PlayStation 3 firmware `PS3UPDAT.PUP` should be placed into the `bios` folder on the userdata. Sony distributes this firmware on their website for installing onto your PlayStation 3; no link can be provided but it's easy enough to find by using a search engine.

• Accepted ROM formats: .ps3 .psn .squashfs

Place your Sony Playstation 3 ROMs in /userdata/roms/ps3.

Standardized features available to all cores of this emulator: ps3.videomode

The emulator we use is RPCS3, the PS3 opensource emulator. It requires more resources than older systems, in particular you need a decent CPU with a Vulkan-compatible GPU for hardware acceleration. You won't run games correctly if you don't have GPU acceleration, please refer to RPCS3 hardware recommendations on their website.

On Batocera 29, for the first run, you need to manually install the firmware into RPCS3. In order to do so, you need to launch the File browser from [F1] when you are on the main systems menu, go to Applications and run the application rpcs3-config.

When you are on the RPCS3 configuration tool, go to the File menu and select Install firmware. The firmware file you need to provide is the one installed above. It's located in /userdata/bios/PS3UPDAT.PUP on the Batocera Linux file system. The install of the PlayStation 3 firmware will take a few minutes (“Compiling PPU modules”)… please be patient!

Once you have correctly installed the firmware in the previous step, you can quit the File browser ([Ctrl]+[Q]) and go in the PS3 system menu from EmulationStation.

PlayStation 3 games are installed as .ps3 directories.

On the first run of each game, RPCS3 will be compiling PPU modules again.

1. Install the game from pkg files in rpcs3-config
2. Create a text file in roms/ps3/ with a .psn extension. The contents of the file is the game's ID - for example, Scott Pilgrim vs. the World (which won't get out of demo mode unless it's running from the proper folder) would contain NPUB30162 in the PSN file.

Scott Pilgrim vs. the World.psn

NPUB30162

And that's it. I added an extra line to the English version of the PS3's system text to explain it.

From Batocera v33 and higher, you can losslessly compress PS3 game folders as SquashFS images and still have RPCS3 read them as if though they weren't compressed at all!

To do so, open up SSH and run the following commands on your already installed games:

cd /userdata/roms/ps3
mksquashfs "<game name>.<folder extension>" "<game name>.<folder extension>.squashfs"

For example:

cd /userdata/roms/ps3
mksquashfs "little big planet.ps3" "little big planet.ps3.squashfs"

You can check the latest PS3 game compatibility from the official list on RPCS3 website.

Here are the Sony Playstation 3's controls shown on a Batocera Retropad:

For further troubleshooting, refer to the generic support pages.