Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
hardware:nfc [2026/02/06 07:25] – [Installation] nadenislamarrehardware:nfc [2026/02/06 12:44] (current) nadenislamarre
Line 1: Line 1:
 Since batocera 43, you can use a nfc reader and cards to start/stop your games or execute any custom action (like shutting down batocera). Since batocera 43, you can use a nfc reader and cards to start/stop your games or execute any custom action (like shutting down batocera).
 +
 +{{:hardware:nfc_preview.jpg?800|}}
  
 ===== Required hardware ===== ===== Required hardware =====
Line 6: Line 8:
 {{:hardware:nfc_reader.jpg?400|}} {{:hardware:nfc_reader.jpg?400|}}
  
-It is recommanded to use a pn532 reader while it is recognized by both software you can use in batocera.+It is recommanded to use a pn532 reader while it is recognized by both software you can use in batocera. It costs about 10€.
  
 The integrated batocera nfc service supports only pn532 readers. The integrated batocera nfc service supports only pn532 readers.
Line 36: Line 38:
   * is present in the batocera content downloader.   * is present in the batocera content downloader.
   * should be available for most batocera supported boards (packages are built by the zaparoo team)   * should be available for most batocera supported boards (packages are built by the zaparoo team)
-  * supports more nfc reader cards+  * supports more nfc readers hardware
   * can connect to your phone to read qr code instead of nfc tags   * can connect to your phone to read qr code instead of nfc tags
   * allows you to produce scenario and different interactions with other hardware   * allows you to produce scenario and different interactions with other hardware
Line 44: Line 46:
 === Plug the nfc reader to batocera === === Plug the nfc reader to batocera ===
 {{:hardware:nfc_plug_to_pc.jpg?400|}} {{:hardware:nfc_plug_to_pc.jpg?400|}}
 +
 +Plug the nfc reader to batocera.
  
 === Start the nfc service === === Start the nfc service ===
-{{:hardware:nfc_service.jpg?400|}}+{{:hardware:nfc_service.jpg?600|}} 
 + 
 +From emulationstation, go in the system menu, find the services entry, and enable the simple nfc service. 
 + 
 +Note that the nfc reader must be connected to batocera first. 
 +If when starting, the simple nfc service detects no hardware, it stops. 
 + 
 +The simple nfc service is not enabled by default in batocera, cause the hardware used for nfc readers (uart converter) is generic, and cannot be distinguished from some other hardware.
  
 === Write the name of a card on a nfc tag === === Write the name of a card on a nfc tag ===
-{{:hardware:nfc_write_menu.jpg?400|}}+{{:hardware:nfc_write_menu.jpg?600|}} 
 + 
 +From emulationstation, choose a game, and press a long time on it to display its menu. 
 +Choose "Write an nfc tag for this game"
 + 
 +If the entry is not present, it means that the nfc reader was not detected.
  
 {{:hardware:nfc_card.jpg?400|}} {{:hardware:nfc_card.jpg?400|}}
 +
 +Put the nfc tag on the reader to write it.
  
 === Usage === === Usage ===
  • hardware/nfc.1770362735.txt.gz
  • Last modified: 3 months ago
  • by nadenislamarre