Differences

This shows you the differences between two versions of the page.

--- hardware:capcom_home_arcade [2021/10/04 05:59] – added image of pressing the FEL button, added warning about electric shock atari
+++ hardware:capcom_home_arcade [2021/12/13 03:52] (current) – ↷ Links adapted because of a move operation 54.36.148.2
@@ Line 7: / Line 7: @@
 ===== Performance =====
-You can play SNES games without special chips at full speed and some PSX titles. So keep it to 8-bit, non-demanding 16-bit and a bit of 32-bit systems. It's similar to an underclocked Pi 2 for reference. The main reason you're buying this is for the novelty of having a giant Capcom logo as your arcade stick anyway.
+You can play most SNES games at full speed and most PSX titles. Demanding titles like Starfox/Bloody Roar may struggle a bit. So keep it to 8-bit, non-demanding 16-bit and a bit of 32-bit systems. It's similar to an underclocked Pi 2 for reference. The main reason you're buying this is for the novelty of having a giant Capcom logo as your arcade stick anyway.
 ===== Installation =====
@@ Line 41: / Line 41: @@
   - Turn off the CHA and remove the micro-USB power adapter if it is still plugged in.
   - Connect one side of the USB Type A cable to the ''EXT USB'' port on the CHA. Do not plug the other side into the computer yet.
-  - Press and hold the FEL mode button underneath the board. The FEL button is easily reachable with just your finger as it is at the edge of the board. It clicks when pressed, and requires a surprising amount of pressure to activate. {{ hardware:cha-case-back-open-annotated.png?1000 |It's to the left of the controller serial ports, on the other side of the board.}} {{ hardware:fel_button_press_without_removing_the_pcb.jpg?direct&360 |You're safe, trust us.}}<WRAP center round important 60%>
+  - Press and hold the FEL mode button underneath the board. The FEL button is easily reachable with just your finger as it is at the edge of the board. It clicks when pressed, and requires a surprising amount of pressure to activate. {{ hardware:cha-case-back-open-annotated.png?1000 |It's to the left of the controller serial ports, on the other side of the board.}} {{ hardware:fel_button_press_without_removing_the_pcb.jpg?direct&360 |You're safe, trust us.}}<WRAP center round important>
 There is a very low chance that you might receive a 5V 0.2A electric shock in your extremities from doing this. This is usually harmless and undetectable to humans (if you've ever touched the metal outer casing of a phone charger, you've already received a larger shock than this). Nonetheless, if you're utilizing some sort of medical equipment that is sensitive to even minor shocks, take the precaution of wearing rubber gloves before doing this.
 </WRAP>
@@ Line 70: / Line 70: @@
 <WRAP center round tip>
-No need to use FEL mode again, if everything goes according to plan. Once Batocera is installed, you can update it using its [[:check_for_updates|built-in tools]] or [[:current_and_previous_releases#update_downgrade_batocera|via SSH]]!
+No need to use FEL mode again, if everything goes according to plan. Once Batocera is installed, you can update it using its [[:updates_and_downloads|built-in tools]] or [[:current_and_previous_releases#update_downgrade_batocera|via SSH]]!
 </WRAP>