Differences

This shows you the differences between two versions of the page.

--- hardware:ayn [2025/11/08 18:01] – ↷ Links adapted because of a move operation nadenislamarre
+++ hardware:ayn [2026/04/09 15:38] (current) – [Installation] Precision on "set device model" lbrpdx
@@ Line 10: / Line 10: @@
 Details on [[playground:hardware:odin|Aya Odin Base/Pro]]
-===== ODIN 2 =====
+===== ODIN 2 and Thor Variants =====
-==== Installation ====
-  - burn a sdcard with batocera on it
-  - boot the board on Android
-  - download [[https://renegade-project.tech/en/ayn-odin2/linuxloader-release|odin2_custom_abl_xxx.7z]] and extract it at the top of the root of Android internal storage
-  - go in Android settings : "Odin settings" -> "Run script as Root" to run the "backup_and_flash.sh" script (The original ABL will be backed up to /sdcard/backup)
-  - reboot and enjoy
-===== ODIN Portal =====
-===== Thor =====
 ==== Installation ====
-Same as Odin 2.
+  - On your AYN device on Android or another device / OS.
+  - Download [[https://batocera.org/boards_requirements/SM8550-ABL.zip|SM8550-ABL.zip]] and extract it to an sdcard.
+  - Boot Android ensure the you insert the sdcard with the extracted files.
+  - Using the file manager (Files) copy the files off your sdcard onto the Android file system into a directory called **odin2_custom_abl** (this directory name is important).
+  - To ensure you're using the correct location to create the **odin2_custom_abl** directory. In the File app, hit the hamburger symbol on the top right (three lines) and then choose your device (i.e. AYN Thor)
+  - Go to Android settings, at the bottom in the **Odin2 or Thor settings** -> **Run script as Root** and select the **backup_and_flash.sh** script from the directory called **odin2_custom_abl**.
+  - The script will run quickly and back up the original boot loader to **/sdcard/backup/** directory.
+  - Keep this as a backup in case you want to rollback.
+  - Download the Batocera SM8550 image and burn it on an micro SDCard. **Warning:** make sure you have a high quality SDcard. In my testings, I failed booting a 256GB no-name card, while a 128GB PNY went flawlessly.
+  - Then, if you have your Batocera micro SDCard inserted in your SM8550 device, boot it up and it starts on Batocera.
+  - Enter the bootloader fastboot menu by pressing ''[vol -]'' and ''[power]'' and switch the boot mode to Linux (use volume buttons and power to navigate and select).
+  - Then navigate to 'Set device model'. There you must choose your device from the list (if you don't do it, your machine might not boot). Then navigate to 'START' and press power to boot.
+  - If you want to go back to Android, remove the SDCard, enter the boot loader menu by pressing ''[vol +]'' and ''[power]'' and switch the boot selection from Linux to Android. and you'll be back to Android.
+==== Troubleshooting ===
+You can access some boot options by keeping pressed the **[Vol +]** and **Power** buttons. The boot loader menu is in portrait mode and looks like this:
+{{ :hardware:thor_pre_flash.jpeg?400 |}}
+You can switch from Android to Linux booting from this menu.