Differences

This shows you the differences between two versions of the page.

--- add_tft_screen_rpi_only [2022/02/05 09:42] – added pistation instructions, added note about how fkms is required for most lcd displays atari
+++ add_tft_screen_rpi_only [2022/02/17 05:24] (current) – update on the 64-bit status of raspiOS atari
@@ Line 4: / Line 4: @@
 <WRAP center round tip>
-Some drivers only work on 32-bit systems (most typically because Raspberry Pi OS is still 32-bit after all these years come on guys) so you will have to use [[https://mirrors.o2switch.fr/batocera/rpi3/stable/last/archives/31/batocera-rpi3-31-20210615.img.gz|Batocera v31 or earlier on the RPi3B+]] or [[https://mirrors.o2switch.fr/batocera/rpi4/stable/last/batocera-29-rpi4-20201203.img.gz|the last available 32-bit build, v29, for RPi4]].
+Some drivers only work on 32-bit systems (most typically because Raspberry Pi OS was 32-bit for the majority of its life, [[https://www.raspberrypi.com/news/raspberry-pi-os-64-bit/|but has recently moved to 64-bit]]) so you will have to use [[https://mirrors.o2switch.fr/batocera/rpi3/stable/last/archives/31/batocera-rpi3-31-20210615.img.gz|Batocera v31 or earlier on the RPi3B+]] or [[https://mirrors.o2switch.fr/batocera/rpi4/stable/last/batocera-29-rpi4-20201203.img.gz|the last available 32-bit build, v29, for RPi4]].
 </WRAP>
@@ Line 55: / Line 55: @@
 Credit to xuancong on the forums. [[https://forum.batocera.org/d/6829-tutorial-batocera-on-mhs-lcd-display-for-rpi4|Original post.]]
-==== PiStation LCD display ====
+==== PiStation Deluxe LCD display ====
-<WRAP center round todo>
+{{:retroflag-pistation-case-lcd-3.jpg?400|}}
-todo: picture, confirm settings
-</WRAP>
+The PiStation was confirmed to work with the latest 64-bit builds of Batocera (**v33** was tested).
   - Adjust settings in ''/boot/config.txt''
     - Comment out the line: ''#dtoverlay=vc4-kms-v3d-pi4''
     - Add the line: ''dtoverlay=vc4-fkms-v3d-pi4''
-    - Add the following lines: <code>
-# This sets 720p for the PiStation LCD only.
-[EDID=YDK-YD2680]
-hdmi_drive=2
-hdmi_group=2
-hdmi_mode=85
-</code>